1/2 ton ok for a Truckmount |
Post Reply |
Author | |
Paul63
Groupie Joined: 19/January/2010 Location: Canada Status: Offline Points: 45 |
Post Options
Thanks(0)
Posted: 22/January/2010 at 9:34pm |
Hello , I would like to upgrade to a truckmount unit and was also shopping for a 3/4 ton Cargo Van. The problem i have encountered is that there is insufficient clearance to get a new or newer cargo van into my Garage.
Would a GM/Chev 1500 or Ford E-150 be ok for a 700 lb truckmount, 60 gallon water tank , plus a couple portables to boot?. I said to my dealer that i will keep my current 1/2 ton van and put my new truckmount in that, but my dealer says NO. On jondon and other sites i do see some 1/2 ton vans equipped with truckmounts. your input and recommendations will be appreciated |
|
Sponsored Links | |
CCandmore
Senior Member Joined: 07/December/2006 Location: Virginia, USA Status: Offline Points: 150 |
Post Options
Thanks(0)
|
In the long run, you'd be better off with a 3/4 ton or 1 ton.
|
|
CCandmore
Senior Member Joined: 07/December/2006 Location: Virginia, USA Status: Offline Points: 150 |
Post Options
Thanks(0)
|
I think the Dodge 3500s have a lower clearance.
|
|
Steaminpile
Master Carpet Cleaner Joined: 04/February/2004 Location: Canada Status: Offline Points: 1155 |
Post Options
Thanks(0)
|
IMHO
No it is not o.k.
unless you have a really small TM like a Blazer or Spitfire or such
You will go through brakes,shocks ,springs much faster............good luck finding a 15inch tire to hold the weight.
I'm kinda in the same boat,,,,,my van doesn't fit in my garage..........I'm just going to put a higher door in it this summer,,,,,,,,,,,,I currently rent a spot in my neighbors garage Edited by Steaminpile - 23/January/2010 at 1:43pm |
|
A.K.A.
Andy |
|
danmarck82
Carpet Cleaning Specialist Joined: 08/February/2004 Status: Offline Points: 618 |
Post Options
Thanks(0)
|
I have a 1 ton and a small standard opening garage door. It fits, but I have to adjust the door so that it completely gets up and out of the way when it is at the top position.
|
|
prouddadx3
Groupie Joined: 06/November/2008 Location: Boulder Status: Offline Points: 86 |
Post Options
Thanks(0)
|
I agree I've had all manner of vans and the smaller vans just wear out especially if you are going to carry water and do flood work. Spend some time laying out your shelves and stuff. It will be worth the time in the long run.
|
|
Paul63
Groupie Joined: 19/January/2010 Location: Canada Status: Offline Points: 45 |
Post Options
Thanks(0)
|
I have to re-shingle my garage roof this spring, i am considering adjusting the roof pitch to a slighter higher angle. Involves some re-framing....plus it wouldn't hurt to change my 40 year old garage doors........
|
|
bonesheal
Newbie Joined: 18/September/2007 Location: United States Status: Offline Points: 9 |
Post Options
Thanks(0)
|
I have the same problem, my van won't fit in my garage, so I have to wash it more frequently and heat it during the winter. I'd be ok with the smaller one if I weren't carrying water everywhere.
|
|
BradleyScott
Newbie Joined: 21/April/2010 Status: Offline Points: 2 |
Post Options
Thanks(0)
|
According to your requirement i suggest you a 3/4 ton.
|
|
John L
Carpet Cleaning Guru Joined: 29/November/2004 Location: I'm Right Here! Status: Offline Points: 4013 |
Post Options
Thanks(0)
|
1/2 ton heavy duty will do the job..
|
|
westcovina
Senior Member Joined: 17/December/2010 Location: West Covina Status: Offline Points: 103 |
Post Options
Thanks(0)
|
I would choose the 1 ton for more durability.
|
|
77748
Journeyman Joined: 12/August/2004 Status: Offline Points: 298 |
Post Options
Thanks(0)
|
If you are going to do this do it right the first time so you do not have to do it again.
3/4 or 1 ton. I unfortunately had to learn the hard way. Good luck |
|
CarpetCleanerND
Newbie Joined: 14/February/2011 Location: Fargo Status: Offline Points: 6 |
Post Options
Thanks(0)
|
1/2 ton van will die very fast under the weight.
|
|
77748
Journeyman Joined: 12/August/2004 Status: Offline Points: 298 |
Post Options
Thanks(0)
|
I had beefed up my suspension and it still swayed. Later a tie rod broke on me while driving and I was on the freeway at the time engraving the freeway asphalt with my rotor as I tried to stop safely with me and and my worker with our dear lives.
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Welcome to KleenKuip.com's Professional Carpet Cleaners Discussion Forum!