PLEASE HELP!!!

Does the block not come off your machine?

LOL!! I own a portable also d**khead.I'm new and don't have a lot of customers just yet.Sorry I can't afford a 1,000-3,000 dollar machine just yet.It's called rent and cost living dumbass!

Edited by DeepScrub - 06/March/2008 at 9:57pm

Anyway in response to you question you can get a drive block for your floor machine that will spin the bonnets.  About 80 bucks.

Edited by FuzzSucker - 06/January/2009 at 11:57pm

i started out with one rotary and was making 25,000 a year with it on the side..

If you wanna get smart and ignore the splash'n'dash brigade, you can always buy yourself a new brush (which you should update regularly anyway, they do wear out relatively quickly!), then grab your old brush and cut the bristles down to 2-3mm length. You can then use that as your pad drive, with the bonus that if you're using the Fibretouch pads, you can use the shower feed to great effect as well (assuming you have a tank on your machine; if not, GET ONE!).

That way you'll have a great start-up package for encapping that'll happily see you through until such time as you buy a dedicated encap machine.

First rule of business is
only listen to those who are big successes and the recognized leaders in the business
you are endevouring to make your own when it comes to what it takes for a startup or growing the ongoing enterprise. 

All you will read in here is what WE did or are doing which has absolutely nothing to do with your business model and while some is offered with a sincere effort to help you avoid our mistakes (which is actually something where our efforts, due to some unexamined reason(s), failed to produce the results we hypothesized) none should be taken as gospel - except for the one about putting a penny in a wall socket.  That one still burns a little.

Unless you can find the heads of the Stanley, ChemDry or Coit companies here which I think is the last thing on their list right below gonad piercings, I doubt that anyone here (including me) qualifies for the cover of Fortune or Inc magazines. 

But I did do a spread in 'Flabby Farts' where I was recognized as one of the top 100 pervs of 2008 so if that is your interest, I am your man.  Available on newstands everywhere next to the newest editions of HoverRound Honeys and Depends Divas magazines. A must read for the man who has to 'go' TOOOO often.  




Edited by duckcountry - 30/June/2008 at 2:00pm