![]() |
Dear Ted |
Post Reply ![]() |
Page 12> |
Author | |
carpetologist ![]() The Great Hardini ![]() ![]() Hocus Pocus Joined: 20/January/2004 Location: Canada Status: Offline Points: 1712 |
![]() ![]() ![]() ![]() ![]() Posted: 27/July/2005 at 10:19am |
DLD The Ninja with 2 normal three stage vacuums will not blow fuses as long as it is plugged into Two Separate 15amp service and not on long extension cords. If you have an American made Ninja with two high performance 3 stage that offer 200 inches of lift rather than the standard that offers 180 in" of water lift, Yes you will shut down breakers. To know if you are into separate lines you should look at purchasing the circuit locator, this saves frustration and embarrassment. Who needs to pay for a load of meat or ice cream the next morning. A circuit locator can offer you peace of mind when you know your employees are out there doing their thing.
Edited by Carpetologist |
|
Kleen Kuip Supply Mart Inc.
New & Used Professional Carpet Cleaning Machines, Restoration Equipment, Training, Service and Supplies |
|
![]() |
|
Sponsored Links | |
![]() |
|
MR. STEAMER ![]() True Patriot ![]() Only in the GTA Joined: 03/March/2004 Location: Canada Status: Offline Points: 14549 |
![]() ![]() ![]() ![]() ![]() |
what about the pump???
|
|
www.mr-steamer.com
|
|
![]() |
|
Ed Valentine ![]() Carpet Cleaning Specialist ![]() Joined: 14/September/2004 Location: United States Status: Offline Points: 770 |
![]() ![]() ![]() ![]() ![]() |
Ken;
I can see that you have been a good student. You have passed your test.
Good Fortune to all; Ed Valentine |
|
![]() |
|
checkmate ![]() Senior Member ![]() ![]() Joined: 16/July/2005 Location: United States Status: Offline Points: 114 |
![]() ![]() ![]() ![]() ![]() |
You can have 5 plugs running on the same breaker and a 15 amp breaker holds about 1700 watts before it heats up and pops. So you also need to look for other things that may be plug in like computers and stuff. When I run my ninja, I aways walk around and check all the plugs. I have been in houses were I even had to shut over head lights off. But I have not had that problem in offices even old ones. |
|
![]() |
|
MR. STEAMER ![]() True Patriot ![]() Only in the GTA Joined: 03/March/2004 Location: Canada Status: Offline Points: 14549 |
![]() ![]() ![]() ![]() ![]() |
so why do they pop the breaker???
|
|
www.mr-steamer.com
|
|
![]() |
|
Superglide Ken ![]() Grand Potentate ![]() SGK Joined: 17/March/2004 Location: Canada Status: Offline Points: 4868 |
![]() ![]() ![]() ![]() ![]() |
Actually, it is the opposite of what you just said Steamer. Lamb Amteck motors draw their maximum amp draw when NOT under load, because that is the time that they move their maximum air flow, which is what takes the most energy. When under load by restricting the airflow as when the wand is on the carpet, airflow goes down drastically, and so does the amp draw. I have tested this many times with my meter, and it always works this way. Interestingly, PD blowers work exactly the oposite to this, increasing the energy needed as lift increases. Go figgure, eh?
|
|
Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs.
|
|
![]() |
|
Adwa ![]() Queen of the Board ![]() ![]() Joined: 05/March/2004 Location: Canada Status: Offline Points: 4568 |
![]() ![]() ![]() ![]() ![]() |
Ya........your right sorry.....I did mean locator.
![]() |
|
The Following Statements do not Necessarily Reflect the Views of this Forum Network
http://www.kleenkuip.com |
|
![]() |
|
dontlikedennis ![]() Journeyman ![]() Joined: 18/March/2005 Location: Canada Status: Offline Points: 259 |
![]() ![]() ![]() ![]() ![]() |
I think she means circuit "locator"
|
|
![]() |
|
MR. STEAMER ![]() True Patriot ![]() Only in the GTA Joined: 03/March/2004 Location: Canada Status: Offline Points: 14549 |
![]() ![]() ![]() ![]() ![]() |
get a truck mount
![]() |
|
www.mr-steamer.com
|
|
![]() |
|
Adwa ![]() Queen of the Board ![]() ![]() Joined: 05/March/2004 Location: Canada Status: Offline Points: 4568 |
![]() ![]() ![]() ![]() ![]() |
Your right Steamer........thats when a circuit breaker comes in handy......lets you know if your plugged into the same circuit....saves time and heart break.......when your running around looking for the fuse box.
|
|
The Following Statements do not Necessarily Reflect the Views of this Forum Network
http://www.kleenkuip.com |
|
![]() |
|
MR. STEAMER ![]() True Patriot ![]() Only in the GTA Joined: 03/March/2004 Location: Canada Status: Offline Points: 14549 |
![]() ![]() ![]() ![]() ![]() |
both pulling around 7 amps when not under load.... them when you put wand to carpet and water 15 amps BOOM
|
|
www.mr-steamer.com
|
|
![]() |
|
Adwa ![]() Queen of the Board ![]() ![]() Joined: 05/March/2004 Location: Canada Status: Offline Points: 4568 |
![]() ![]() ![]() ![]() ![]() |
Actually if you have two 3-stage vacuums........you will also have two cords.
|
|
The Following Statements do not Necessarily Reflect the Views of this Forum Network
http://www.kleenkuip.com |
|
![]() |
|
dontlikedennis ![]() Journeyman ![]() Joined: 18/March/2005 Location: Canada Status: Offline Points: 259 |
![]() ![]() ![]() ![]() ![]() |
damn For real |
|
![]() |
|
MR. STEAMER ![]() True Patriot ![]() Only in the GTA Joined: 03/March/2004 Location: Canada Status: Offline Points: 14549 |
![]() ![]() ![]() ![]() ![]() |
hell yes....lol snap crackle pop.... hope you have a spare one...lol plug into the stove |
|
www.mr-steamer.com
|
|
![]() |
Post Reply ![]() |
Page 12> |
Tweet |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Welcome to KleenKuip.com's Professional Carpet Cleaners Discussion Forum!