Print Page | Close Window

Dear Ted

Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Carpet Cleaners Hangout
Forum Description: General discussion on anything related to carpet cleaning
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=1806
Printed Date: 25/February/2025 at 12:44pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Dear Ted
Posted By: dontlikedennis
Subject: Dear Ted
Date Posted: 26/July/2005 at 9:08pm
The Ninja with 2 Three Stage Vacs...does she blow breakers in older buildings in GTA????



Replies:
Posted By: MR. STEAMER
Date Posted: 26/July/2005 at 9:12pm

hell yes....lol snap crackle pop.... hope you have a spare one...lol

plug into the stove



-------------
www.mr-steamer.com


Posted By: dontlikedennis
Date Posted: 26/July/2005 at 9:56pm

damn

For real



Posted By: Adwa
Date Posted: 26/July/2005 at 10:37pm
Actually if you have two 3-stage vacuums........you will also have two cords.

-------------
The Following Statements do not Necessarily Reflect the Views of this Forum Network

http://www.kleenkuip.com - http://www.kleenkuip.com


Posted By: MR. STEAMER
Date Posted: 26/July/2005 at 10:51pm
both pulling around 7 amps when not under load.... them when you put wand to carpet and water 15 amps BOOM

-------------
www.mr-steamer.com


Posted By: Adwa
Date Posted: 26/July/2005 at 10:53pm
Your right Steamer........thats when a circuit breaker comes in handy......lets you know if your plugged into the same circuit....saves time and heart break.......when your running around looking for the fuse box.

-------------
The Following Statements do not Necessarily Reflect the Views of this Forum Network

http://www.kleenkuip.com - http://www.kleenkuip.com


Posted By: MR. STEAMER
Date Posted: 26/July/2005 at 10:54pm
get a truck mount

-------------
www.mr-steamer.com


Posted By: dontlikedennis
Date Posted: 27/July/2005 at 12:06am

I think she means circuit "locator"

 

Originally posted by Adwa Adwa wrote:

Your right Steamer........thats when a circuit breaker comes in handy......lets you know if your plugged into the same circuit....saves time and heart break.......when your running around looking for the fuse box.



Posted By: Adwa
Date Posted: 27/July/2005 at 12:10am
Ya........your right sorry.....I did mean locator.

-------------
The Following Statements do not Necessarily Reflect the Views of this Forum Network

http://www.kleenkuip.com - http://www.kleenkuip.com


Posted By: Superglide Ken
Date Posted: 27/July/2005 at 12:53am
Actually, it is the opposite of what you just said Steamer. Lamb Amteck motors draw their maximum amp draw when NOT under load, because that is the time that they move their maximum air flow, which is what takes the most energy. When under load by restricting the airflow as when the wand is on the carpet, airflow goes down drastically, and so does the amp draw. I have tested this many times with my meter, and it always works this way. Interestingly, PD blowers work exactly the oposite to this, increasing the energy needed as lift increases. Go figgure, eh?

-------------
Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs.


Posted By: MR. STEAMER
Date Posted: 27/July/2005 at 7:22am
so why do they pop the breaker???

-------------
www.mr-steamer.com


Posted By: checkmate
Date Posted: 27/July/2005 at 8:34am

You can have 5 plugs running on the same breaker and a 15 amp breaker holds about 1700 watts before it heats up and pops. So you also need to look for other things that may be plug in like computers and stuff.

When I run my ninja, I aways walk around and check all the plugs.

I have been in houses were I even had to shut over head lights off.

But I have not had that problem in offices even old ones.



Posted By: Ed Valentine
Date Posted: 27/July/2005 at 8:39am

Ken;

 

I can see that you have been a good student. You have passed your test.

 

Good Fortune to all;

Ed Valentine

http://www.cross-american.com - www.cross-american.com  



Posted By: MR. STEAMER
Date Posted: 27/July/2005 at 9:30am
what about the pump???

-------------
www.mr-steamer.com


Posted By: carpetologist
Date Posted: 27/July/2005 at 10:19am

DLD

The Ninja with 2 normal three stage vacuums will not blow fuses as long as it is plugged into Two Separate 15amp service and not on long extension cords.

If you have an American made Ninja with two high performance 3 stage that offer 200 inches of lift rather than the standard that offers 180 in" of water lift, Yes you will shut down breakers.

To know if you are into separate lines you should look at purchasing the circuit locator, this saves frustration and embarrassment.  Who needs to pay for a load of meat or ice cream the next morning.  A circuit locator can offer you peace of mind when you know your employees are out there doing their thing.

 



-------------
Kleen Kuip Supply Mart Inc.

http://www.kleenkuip.com - New & Used Professional Carpet Cleaning Machines, Restoration Equipment, Training, Service and Supplies



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net