Padmans Board
Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Encapsulation, Very Low Moisture, Oscillating Pad Cleaning
Forum Description: Discuss anything relating to very low moisture, encap and oscillating pad cleaning
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=896
Printed Date: 22/November/2024 at 9:36pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Padmans Board
Posted By: MR. STEAMER
Subject: Padmans Board
Date Posted: 21/December/2004 at 10:59pm
|
Here is a thread I found intersting..... they cut and paste us all the time.. the way you guys talk about OP... it sounds so easy with the absolute best results... Did my first job Saturday with the Conquerer and I don't think it turned out all that great. It was commercial glue down low level and I cleaned without a glider. Had to fight the hell out of the machine and although the carpet looked o.k when done it didn't clean to my satisfaction. I must have been doing something wrong. I know there is a learning curve but when I did the berber in my house the other day it seemed like the machine was pulling hard to one side and I was having to fight it then too and was using a glider. Am I doing something wrong or is there some type of adjustment that needs to be made on the machine? I need the help of some seasoned pad cleaning veterans. Thanks in advance ------------- www.mr-steamer.com |
Replies:
Posted By: Nordic 1
Date Posted: 21/December/2004 at 11:31pm
|
Nice to be Anonymous eh?
Nordic 1 |
Posted By: PadMan
Date Posted: 22/December/2004 at 12:50am
|
LOL, yep steamer, I bet the FIRST time you used HWE you knew EXACTLY what you were doing. ------------- Converting HWE customer to VLM customers for 30 Years! |
Posted By: MR. STEAMER
Date Posted: 22/December/2004 at 6:59am
|
I might even let you walk in my shadow... But you'll never be man enough to hold my Wand ------------- www.mr-steamer.com |
Nordic 1 wrote:Posted By: doug
Date Posted: 22/December/2004 at 7:31am
As long as it is your wand you want him to hold! ------------- Just My opinion |
Posted By: james cooper
Date Posted: 22/December/2004 at 7:53am
|
Subbing your way to greatness - a percentage at a time! |
Posted By: Ed Valentine
Date Posted: 22/December/2004 at 8:28am
|
Steamer;
Gary admitted: "I must have been doing something wrong..." And, not exactly knowing what he was doing, he probably was. In reality, we all know that the operator has alot to do with the end results: appearance. Back in the '40's and 50's, my Grandmother used to use a brush and a pail to freshen up her area rugs. They always looked good. John makes some great OP equipment that I know does a wonderful job when operated properly. Furthermore, he is a very creditable individual who helps everyone who wants his help and assistance. To use a thread comment like Gary's only conveys the wrong impression and is taking advantage of a personal opportunity for revenge, IMHO. Good Fortune to all; Ed Valentine |
Posted By: PadMan
Date Posted: 22/December/2004 at 10:47am
|
Thank you Ed. ------------- Converting HWE customer to VLM customers for 30 Years! |
Posted By: doug
Date Posted: 22/December/2004 at 4:57pm
|
Only on this board is it in bad taste. What about the other board? ------------- Just My opinion |
Posted By: MR. STEAMER
Date Posted: 22/December/2004 at 5:40pm
|
Everything on this board is in bad taste.... people are so anal ------------- www.mr-steamer.com |
Posted By: PadMan
Date Posted: 22/December/2004 at 5:52pm
|
Sorry to hear the crowd is a little TOO TOUGH for you, seems you do better in a smaller room. I guess it is easier here to HOLD YOUR OWN. ------------- Converting HWE customer to VLM customers for 30 Years! |
Posted By: MR. STEAMER
Date Posted: 22/December/2004 at 5:57pm
|
talkin bout this forum padman ------------- www.mr-steamer.com |
Posted By: doug
Date Posted: 22/December/2004 at 5:58pm
|
I am lost on that response. ------------- Just My opinion |