Print Page | Close Window

Mold Removal

Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Water Damage and Fire Damage Restoration Discussion
Forum Description: Discuss anything relating to fire and water damage restoration
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=6241
Printed Date: 21/December/2024 at 6:03am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Mold Removal
Posted By: jerryjacson
Subject: Mold Removal
Date Posted: 27/October/2009 at 7:22am
some tips to remove Mold
  • Fix leaky plumbing and leaks in the building envelope as soon as possible.
  • Watch for condensation and wet spots. Fix source(s) of moisture problem(s) as soon as possible.
  • Prevent moisture due to condensation by increasing surface temperature or reducing the moisture level in air (humidity). To increase surface temperature, insulate or increase air circulation. To reduce the moisture level in air, repair leaks, increase ventilation (if outside air is cold and dry), or dehumidify (if outdoor air is warm and humid).



-------------
http://www.soswaterdamage.com/ - soswaterdamage.com



Replies:
Posted By: Hammy
Date Posted: 27/October/2009 at 8:27pm
Thanks for the tips, So if I use some of my plumbing tape, my Sham-wow, a 30 pint dh, and my box fan I should be good to go! Big smile
 
Thanks!


-------------
Could somebody just clean my carpets!


Posted By: doug
Date Posted: 27/October/2009 at 8:29pm
Hammy are you using the KISS method???Guitar

-------------
Just My opinion


Posted By: Hammy
Date Posted: 27/October/2009 at 8:39pm
It works for me Big smile

-------------
Could somebody just clean my carpets!


Posted By: cmaster
Date Posted: 27/October/2009 at 9:42pm
Just turn up the heat, it will dry eventuallyWacko

-------------

The STD Meter


Posted By: jerryjacson
Date Posted: 05/November/2009 at 4:32am
Mold prevention ideas-Maintain low indoor humidity, below 60% relative humidity (RH), ideally 30-50%, if possible.

-------------
http://www.soswaterdamage.com/ - soswaterdamage.com


Posted By: duckcountry
Date Posted: 05/November/2009 at 11:37am
Mold prevention ideas-Move your house to the desert(DM),ideally the Sahara, if possible.

-------------
Are you in a high paying business or are you just a self employed low paid grunt who thinks this business provides dignity?


Posted By: Ken_Is_OK
Date Posted: 05/November/2009 at 2:50pm
If you see mold on drywall aim your air mover right at it, turn on high and leave for 3 days. WinkLOLConfusedDead


Posted By: RIP IT
Date Posted: 05/November/2009 at 4:21pm

Just lick the mould offConfusedDead



-------------
Dont treat people like customers. Treat them like friends.


Posted By: aboveb
Date Posted: 21/September/2011 at 8:02pm
Originally posted by RIP IT RIP IT wrote:

Just lick the mould offConfusedDead



Ugh, no, I would not recommend that... Mold has been link to numerous respiratory and neurological conditions. Just my 2 cents ;P

-------------
Professional - mold removal new jersey .


Posted By: nevinlee
Date Posted: 18/December/2012 at 3:46am
Thanks for sharing this tips on removing the mold. I was looking for it from long time.



Posted By: Robert W
Date Posted: 06/July/2016 at 11:39pm
Thanks for your tips.


Posted By: Robert W
Date Posted: 06/July/2016 at 11:55pm
I think bleach will help in removing the molds.


Posted By: palmerruss
Date Posted: 20/October/2018 at 8:16am
Those are some useful tips that you have shared.Smile
In most of the cases, mold removal isn’t the solution you have to kill it or else it will grow back.
Bleach is the long known effective home remedy to apply including other household cleaners’ vinegar and borax.
While removing the mold at your home, mask, eye protection, and rubber gloves are recommended to use.
This will just give you a temporary solution. So, to get completely get rid of mold it is better to seek for mold removal services.


Posted By: Carpet Clean Pro
Date Posted: 15/April/2019 at 5:11pm
Let's just wait for the climate change- mother nature will remove mould for us


Posted By: MiquelVentimiglia
Date Posted: 10/November/2019 at 11:48pm
Thanks for sharing the tips.


Posted By: lancejay
Date Posted: 10/March/2023 at 3:30am
I believe there are professionals that can help us!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net