No water coming out
Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Truck Mount Carpet Steam Cleaning Machines & Equipment
Forum Description: Discuss anything relating to truckmounts
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=6239
Printed Date: 23/November/2024 at 8:09am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: No water coming out
Posted By: 77748
Subject: No water coming out
Date Posted: 27/October/2009 at 2:02am
|
just bought a slide in that was sitting for 5 years. No water coming out . Called my local vendor and he said; What does the book say? Printed out the schematic. Ran the water from garden hose to freshwater tank. Next was to check the input of catpump. Went extra step hood up garden hose directly. Shaazam !!!! Fresh water had lot of limescale or some white powdery deposit. Cleaned it out saved hundreds. Meaning did troubleshooting no water going into catpump. Someone in this forum said they can can change all the belts in there TM in 15 minutes Prochem Legend SE. Had me scratching my head. Thats awesome! I therefore should be able and it is possible to get it done by 30 minutes. Know your TM. Learn it the knowledge can save you in a bind.  |
Replies:
Posted By: MR. STEAMER
Date Posted: 27/October/2009 at 11:00pm
|
3 belts prochem legend 5 mins ------------- www.mr-steamer.com |
Posted By: 77748
Date Posted: 28/October/2009 at 12:01am
| Tension screws on mounts two on each end correct! |
Posted By: FuzzSucker
Date Posted: 28/October/2009 at 12:37am
|
thats why i hate replacing couplers. At least an hour
------------- http://thepremierclean.com - http://thepremierclean.com | http://carpetcleaning-coloradosprings.com - Colorado Springs Carpet Cleaning |
Posted By: 77748
Date Posted: 03/November/2009 at 11:49pm
|
I attempted to change all 4 belts in a Prochem Legend SE. Two belts are easy but the two twin belts are in the bottom. Stupid design. There are scres to slide the assemblies apart all screws are loose but blower not moving there is a 3 to 4 inch black hose in the niddle and very hard to get your hands in there clamped. Taking it to shop. Damn!!! |
Posted By: John L
Date Posted: 04/November/2009 at 12:35am
You da man Mr.Steamer..LOL!
 |
MR. STEAMER wrote:Posted By: 77748
Date Posted: 04/November/2009 at 5:30pm
|
Mr. Steamer 3 belts there are four my friend. The twin belts about 2 hours right ? The first two ok 5 minutes !!!! |