Carpet Cleaners Hangout - corner cleaning

Print Page | Close Window

corner cleaning

Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Carpet Cleaners Hangout
Forum Description: General discussion on anything related to carpet cleaning
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=5141
Printed Date: 24/February/2025 at 6:01am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: corner cleaning

Posted By: rick007
Subject: corner cleaning
Date Posted: 24/June/2008 at 1:17am

hi guys- just wondering what you do when cleaning all the corners when using a rotary machine? do you use a wand or just vacuum or wipe clean and call it done? if there is a lot of furniture not being moved then there are a lot of corners to be cleaned. what is the fastest and easiest way to do it ? thanks for your help.

-------------
happy cleaning

Replies:

Posted By: Mick Oz
Date Posted: 24/June/2008 at 1:31am

Rick
What i do when i am using the RX20, is spray up from the entrance to the furthest point. I would then connect the vac and solution hose to the wand and perimeter clean starting from the entrance to the furthest point. I would then work my way out using the RX20. This is if the premises is vacant. When its furnished it can be a pain in the butt so i prefer to spray up and rotary scrub and then wand clean using a SLIDE moving and blocking furniture as i go.

Mick

-------------
I'm a happy Little SLIDER

Posted By: rick007
Date Posted: 24/June/2008 at 1:38am

thanks for the info mick. hope things are good down under.

-------------
happy cleaning