Print Page | Close Window

High speed buffing? please help!

Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Tile and Grout and Hard Surface Floor Cleaning Discussion
Forum Description: Discuss anything relating to hard surface flooring cleaning and maintenance
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=5125
Printed Date: 22/December/2024 at 7:36am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: High speed buffing? please help!
Posted By: coleECS
Subject: High speed buffing? please help!
Date Posted: 18/June/2008 at 3:44pm
I recently bought a 1500 koblentz buffer so I can restore that nice high gloss shine for my VCT customers, but I must be doing something wrong.  Instead of bringing back the shine it looks like I'm just making them dull.  This is not good.  Please tell me what I did/doing wrong.  I'm using a product called Restore 'N More.  I'm mixing it with water according to the directions, I'm applying with a rayon mop to a small area but it's still not doing what I hoped it would do.  I really do think it's human error but I need someone to breakdown the process for me.  Thanks to any and all who can lend some wisdom and advice.
 
-Cole



Replies:
Posted By: Ken_Is_OK
Date Posted: 18/June/2008 at 4:19pm
what color is the pad on your burnisher?


Posted By: coleECS
Date Posted: 18/June/2008 at 5:30pm

It's a champange pad.  sorry shouldve mentioned that earlier



Posted By: Ken_Is_OK
Date Posted: 19/June/2008 at 8:39am
try jackaroo or jackaroo lite pad. you might not have the correct floor finish on there to get the best results with burnishing.
 
do you what finish is on the floor and how many coats?


Posted By: coleECS
Date Posted: 19/June/2008 at 9:14am
Two coats of AcrySeal floor sealer and 3 coats of Interplex 25 Metal interlocking polish.  It's a high gloss polish that looks great when it's applied and the desired look stays without burnishing for a few months.  But I have some customers that asked me if I "make the floors shine" like they were just done.  That's why I bought the machine.  I have used a white pad on my 175rpm to "top scrub" the floor and then water mop it a couple times, let dry, then applied a new coat of Interplex25, but I was hoping to save time and polish with a high speed buff.  I love using Interplex because of how it looks when I'm finished with a job (deep wet look) but after about 4 to 5 months in a resturant they do start to dull again.  I expect that to happen when all they do is mop when they close, and I know they don't mop them correctly so dirt is a factor in the dulling process.  I was just hoping to expand my services a bit with this new machine. 


Posted By: aqualityassured
Date Posted: 01/January/2009 at 8:39pm
I am having a similar problem with vct floor in a restaurant.  The floor dulls fast.  Within the first month.  I use a neutral cleaner and mop with clean mops and water.  I was also thinking about buying a burnisher to eliminate that problem but now I not sure how to fix the problem.  Anyone have any ideas.

-------------
_________"We Know How To Clean!"
http://aqualityassured.com/default.aspx - Cleaning Services Atlanta
http://aqualityassured.com/carpetcleaningatlanta.aspx - Carpet Cleaners Atlanta


Posted By: coleECS
Date Posted: 01/January/2009 at 11:02pm
I guess I should have come back here and posted my new found results with my burnisher. I played around with the same product I mentioned called "Restore N More" but I spray it on with regular spray bottle. Light misting in small controlled areas and I started to get the desired results. I also tried a product called "Snap Back" and the worked well, but I really believe you need to experiment a little and watch what you're doing. I did scratch the polish a little while I was atempting to learn, so be careful but don't be afraid to mess up as long as you're willing to fix your mistake. I'm sure you can find a few different products that will all help in restoring the shine, but it really comes down to the person who's doing the job. Not sure if this helps you, but let me know what works for you.

-Cole


Posted By: aqualityassured
Date Posted: 12/January/2009 at 5:16am
Yes it helps.  I just need to get a burnisher

-------------
_________"We Know How To Clean!"
http://aqualityassured.com/default.aspx - Cleaning Services Atlanta
http://aqualityassured.com/carpetcleaningatlanta.aspx - Carpet Cleaners Atlanta


Posted By: flyT
Date Posted: 17/September/2009 at 10:33pm

 Secrets of Success at an Interview

     The subject of today's talk is interviews.
     The key words here are preparation and confidence, which will carry you far.
     Do your homework first. ( http://www.power-leveling-game.com/Final-Fantasy-XI-Gil/ - ffxi gil )
     Find out all you can about the job you are applying for and the organization you hope to work for.
     Many of the employers I interviewed made the same criticism of candidates. "They have no idea what the day to day work of the job brings about. They have vague notions of 'furthering the company's prospects' or of 'serving the community', but have never taken the trouble to find out the actual tasks they will be required to do."
     Do not let this be said of you. It shows an unattractive indifference to your employer and to your job.
     Take the time to put yourself into the interviewer's place. He wants somebody who is hard-working with a pleasant personality and a real interest in the job. http://www.maplestorymesosstore.com - maple story mesos
     Anything that you find out about the prospective employer can be used to your advantage during the interview to show that you have bothered to master some facts about the people who you hope to work for.
     Write down (and remember) the questions you want to ask the interviewer(s) so that you are not speechless when they invite your questions. Make sure that holidays and pay are not the first things you ask about. If all your questions have been answered during the interview, replay: "I did have several questions, but you have already answered them all."
     Do not be afraid to ask for clarification of something that has been said during the interview if you want to be sure what was implied, but do be polite. http://www.wotlkgolds.com - wow gold
     Just before you go to the interview, look again at the original advertisement that you answered, any correspondence from your prospective employer, photocopies of your letter of application or application form and your resume.
     Then you will remember what you said and what they want. This is very important if you have applied for many jobs in a short time as it is easy to become confused and give an impression of inefficiency.
     Make sure you know where and when you have to report for the interview. Go to the building (but not inside the office) a day or two before, if necessary, to find out how long the journey takes and where exactly the place is.
     Aim to arrive five or ten minutes early for the actual interview, then you will have a little time in hand and you will not panic if you are delayed. You start at a disadvantage if you arrive worried and ten minutes late.( http://www.wlkgame.com - wow gold )
     Dress in clean, neat, conservative clothes. Now is NOT the time to experiment with the punk look or (girls) to wear low-cut dresses with miniskirts. Make sure that your shoes, hands and hair (and teeth) are clean and neat.
     Have the letter inviting you for an interview ready to show in case there is any difficulty in communication.
     You may find yourself facing one interviewer or a panel. The latter is far more intimidating, but do not let it worry you too much. The interviewer will probably have a table in front of him/her. Do not put your things or arms on it.
     If you have a bag or a case, put it on the floor beside your chair. Do not clutch it nervously or, worse still, drop it, spilling everything.
     http://www.gamegoldweb.com/Final-Fantasy-XI/ - ffxi gil ,Shake hands if the interviewer offers his hand first. There is little likelihood that a panel of five wants to go though the process of all shaking hands with you in turn. So you do not be upset if no one offers.
     Shake hands firmly - a weak hand suggests a weak personality, and a crushing grip is obviously painful. Do not drop the hand as soon as yours has touched it as this will seem to show you do not like the other person.
     Speak politely and naturally even if you are feeling shy. Think before you answer any questions.
     If you cannot understand, ask: "Would you mind rephrasing the question, please?" The question will then be repeated in different words.
     If you are not definitely accepted or turned down on the spot, ask: "When may I expect to hear the results of this interview?"
     If you do receive a letter offering you the job, you must reply by letter (keep a photocopy) as soon as possible.
     Good luck! http://www.aiongoldweb.com - aion gold

 



Posted By: John L
Date Posted: 13/October/2009 at 11:38pm
Put down more coats of wax (4-5)
and dont wait 5 months for the maintenance. Thats why its dull looking..Pad Cleaning
You should be buffing Pad Cleaningthat out every
2 months if you want that shine to always shine.
 
I use taski products when buffing.. Good stuff..Pad Cleaning


Posted By: 77748
Date Posted: 10/August/2011 at 3:50am
I strip it , seal it 2 to 3 coats  2 to 3 wax and like glass.
I use shineline products. As said like glass. I have use a high speed
just to fuse wax using a hoghair pad. After you need to dustmop and lightmop it!

As far as I am concerned waste of time using high speed.
Just strip using tm to extract then  do light mop
with a nuetralizer and start waxing & sealing. Got Glass ! Break Dance



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net