Tile and Grout and Hard Surface Floor Cleaning Discussion

Print Page | Close Window

VCT Flooring

Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Tile and Grout and Hard Surface Floor Cleaning Discussion
Forum Description: Discuss anything relating to hard surface flooring cleaning and maintenance
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=5108
Printed Date: 22/December/2024 at 5:47am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: VCT Flooring

Posted By: coleECS
Subject: VCT Flooring
Date Posted: 10/June/2008 at 9:09pm

I've been cleaning for 3+ years so I consider myself a newbie, and I was hoping to get some feedback from anyone about a job I recently finished.

VCT flooring right at 1,000 sq ft. I estimated about 4 hours worth of work that would have included stripping, water mopping twice, allowing floor to dry, two coats of sealer and three coats of polish.

I was wrong.

21 hours later (broken up into 4 days) me and my helper finished.

As we would strip, the old wax would sludge. I actually mean, turn grey, then black, and there would still be wax on the floor. I've used the same stripper product for the last 3 years and I have never had this much trouble. Granted, the floors had been neglected and now this resturant had a new owner that wanted "new looking" floors. We stripped with two machines and went through 8 stripping pads and used floor scrappers to peel the wax off this floor. We "quit" the job at least 10 times in our heads as we continued to work, but it really threw us for a loop...and yes I do have pictures if anyone would like to see the before, during, and after photos.

I saw on JonDon's site they had a stripper called melt down that claims you don't need a machine to remove old burnished wax. I ordered a gallon to test and I'll let you know what I find out if anyone is intrested.

-Cole

Replies:

Posted By: danmarck82
Date Posted: 10/June/2008 at 11:29pm

pictures would be interesting !

Posted By: cmaster
Date Posted: 11/June/2008 at 2:52am

Possibly a urethane/urethane fortified finish was applied by the last guy

-------------

The STD Meter

Posted By: Ken_Is_OK
Date Posted: 11/June/2008 at 9:20am

You were trying to strip Satan's Sealer (not the real name), a semi permanent sealer from SC Johnson that was probably topped with 12-20 coats of finish that had been burnished over and over and over.

For this job you require a propane stipping machine, some kick-ass stripper, 3M High Productivity stripping pads, major dwell time and the patience of Mr. Miyagi.

Posted By: coleECS
Date Posted: 11/June/2008 at 12:53pm

Here's a couple of pics from the job...photos taken with my phone...

Posted By: Ken_Is_OK
Date Posted: 11/June/2008 at 1:40pm

looks like crap

Posted By: cmaster
Date Posted: 11/June/2008 at 9:21pm

The Johnson sealer from hell is Technique.

http://www.johnsondiversey.com/Cultures/en-US/OpCo/Products+and+Systems/Products/JWPFCTechnique.htm?category=JWP%20FC%20Vinyl%20FS%20Resilient%20Tile - http://www.johnsondiversey.com/Cultures/en-US/OpCo/Products+and+Systems/Products/JWPFCTechnique.htm?category=JWP%20FC%20Vinyl%20FS%20Resilient%20Tile

-------------

The STD Meter