Print Page | Close Window

How many sq feet

Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Carpet Cleaners Hangout
Forum Description: General discussion on anything related to carpet cleaning
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=4967
Printed Date: 24/February/2025 at 9:28am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: How many sq feet
Posted By: pbm
Subject: How many sq feet
Date Posted: 06/April/2008 at 4:34pm
If the carpet is not that dirty how many sq feet can u clean with a tm with a two man crew..

-------------
The bonnet pro



Replies:
Posted By: pbm
Date Posted: 06/April/2008 at 5:00pm
in a hour sorry i left that out

-------------
The bonnet pro


Posted By: nightrider
Date Posted: 06/April/2008 at 5:55pm
Empty room, after set up time......I alone can pre-spray then clean 800 sq.feet in the first hour, maybe even 1000 sq.ft.............after that I would slow down due to lazyness to perhaps 600 sq.ft.
 
Set up and packing up truck is the biggest loss of time.
 
                                        Nightrider
 
I've had quicker times using  2 Karcher high pressure pumps and 2 Drain-Vac self empty vacuums. It was a 15,000 sq.ft club house...........the 2 of us completed the job in 12 hours including 1 hour lunch and many , many  beer & pizza breaks


Posted By: cleanex
Date Posted: 07/April/2008 at 8:32am
SAME as NR said 1000 first hour and less each hour after.

-------------
DON ELDRED
YOU CAN "STAND" ON OUR REPUTATION


Posted By: pbm
Date Posted: 07/April/2008 at 8:39am
so it sounds like with set up and tear down and doing around 1000sq feet it would be a two hour job

-------------
The bonnet pro


Posted By: John L
Date Posted: 07/April/2008 at 2:13pm
Same here as the guys above.. OH and it dont take 30min to setup and 30 to rapup.. 10-15 for me at the most depending how long the hose run is..
 
I dont know if the others do this but after the last job i will idle the TM turn off heater and chem meter then run the water throught the system while the vac hosed get rapped up.. This cools down the machine.. And spray wd-40 into the blower lube port..


Posted By: nightrider
Date Posted: 07/April/2008 at 2:15pm
That depends.........I'm getting off track right now.......but .........I once had 700 sq. ft. to do and thought I would be done in an hour.................the problem was the job was on the 7th floor of a building with no windows that opened.................so.....................out came the porty and then he said he wanted the truckmount unit.................conclusion..... I was very early for my next appointment.
 
                                                   Nightrider


Posted By: MR. STEAMER
Date Posted: 07/April/2008 at 3:44pm
why are you all watching the clock???  just work...  it all depends on how dirty it is.... how much prep work that has to be done... is it one big straight room or many small ones.  I've clean 1000 sq ft in less than an hour...and I've clean 1000 sq ft in more than 3 hours...  it depends


Posted By: John L
Date Posted: 07/April/2008 at 4:36pm

Who wears depends..? hahahaha!



Posted By: doug
Date Posted: 07/April/2008 at 4:37pm
Steamer I couldn't agree more. It takes how ever long it takes. In the end it will average out.Guitar

-------------
Just My opinion


Posted By: cmaster
Date Posted: 07/April/2008 at 5:54pm
Originally posted by doug doug wrote:

Steamer I couldn't agree more. It takes how ever long it takes. In the end it will average out.Guitar
 
Usually to somewhere between 700-1000Big%20smile


-------------

The STD Meter


Posted By: Hammy
Date Posted: 07/April/2008 at 8:10pm
Just get out the Cimex and be done with it.

-------------
Could somebody just clean my carpets!


Posted By: pbm
Date Posted: 07/April/2008 at 11:23pm
Talking to butler about getting a tm so was just doing the math on everything..So just seeing the averge u guys do... THANKS FOR THE INFO

-------------
The bonnet pro


Posted By: danmarck82
Date Posted: 07/April/2008 at 11:29pm
square footage times your going rate divided by the Average that you wish to make per hours= number of hours you can take and still make your GOAL per HOUR.

Example 1000 square feet times .25( your normal price per square foot ) = $250.00
Divided by what you shoot for per hour ( $100.00 for example) = 2.5 Hours.
This is the number of hours that you shoot for to make your Goal of $100.00 per hour . More than 2.5 hours you are cutting into your goal, less than 2.5 hours your doing fine.


Posted By: h8z2luze
Date Posted: 09/April/2008 at 10:58pm
I agree it ALL depends what kind of carpet, how dirty, stains, etc... 


Oh and I never spend over 20 minutes setting up or taking down the truckmount lol  Usually about 10min I work with 300ft of hose everyday.  UNLESS its like on the 2nd or 3rd story of a hotel or house.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net