Rotovac change
Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Rotovac
Forum Description: Discussion about Rotovac machines.
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=4212
Printed Date: 22/November/2024 at 10:02am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Rotovac change
Posted By: Ream57
Subject: Rotovac change
Date Posted: 21/September/2007 at 9:07pm
|
Anybody know how to change the felt rings on the heads of the rotovac? My distributor just said they spin off but when I tried it doesn't make sense because the heads are made to spin, so I'm just spinning the heads and its not going anywhere... what am I doing wrong??  ------------- I got money in the bank, but E on the tank. |
Replies:
Posted By: doug
Date Posted: 21/September/2007 at 9:25pm
|
spin them in the opposite direction ------------- Just My opinion |
Posted By: Ream57
Date Posted: 21/September/2007 at 9:51pm
|
it looks like its coming off, but I've been spinning for about ten minutes now and the head hasn't come off yet. ------------- I got money in the bank, but E on the tank. |
Posted By: Jeff Van Buren
Date Posted: 21/September/2007 at 11:04pm
| Lean the unit back so the heads are off the floor, facing the unit use a rubber mallot the one on the right tap with mallot clockwise it will loosen right up, the one on the left tap counter clockwise also will loosen up, when re installing there is no need to tap with mallot just spin them down snug by hand. With new felts run unit 10 minutes with heads spinning but not touching floor. Another thing to check if you have many hours on it is the brushes, they are located behind the plasti screw heads on the motors there are 4 of them. |
Posted By: cmaster
Date Posted: 21/September/2007 at 11:11pm
Follow Jeff's advice. Try the mallet  ------------- 
The STD Meter |
Posted By: danmarck82
Date Posted: 22/September/2007 at 1:47am
| It needs a fairly abrupt whack in the opposite direction of rotation . I was always able to accomplish it with the heal of my shoe. I believe if hit in the 2 o'clock position and going downward in a clockwise fashion that usually did it for me . If you haven't had it off for ages It may not be so cooperative. |
Posted By: Ream57
Date Posted: 22/September/2007 at 11:47am
|
Thanks guys, your responses are appreciated ------------- I got money in the bank, but E on the tank. |
Posted By: nscrcr8z
Date Posted: 27/October/2007 at 5:46pm
|
you can also kick it with your foot thats how i get min off..once off take a perm marker and mark your left and right too.....helps out...when putting back on.. ------------- scott |