Rotovac - Rotovac 360 for Tile and grout?

Print Page | Close Window

Rotovac 360 for Tile and grout?

Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Rotovac
Forum Description: Discussion about Rotovac machines.
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=3279
Printed Date: 22/November/2024 at 10:19am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: Rotovac 360 for Tile and grout?

Posted By: CCandmore
Subject: Rotovac 360 for Tile and grout?
Date Posted: 13/December/2006 at 8:20am

Need some advice about cleaning tile and grout. Is the Rotovac 360 good for commercial tile and grout? Would you recommend another machine instead?

Thanks for the help.

CCandmore

Replies:

Posted By: jtuseo
Date Posted: 13/December/2006 at 9:18am

I think I would go for a regular floor buffer. That is what I am doing.

-------------
WWW.PREFERREDCARPETCLEANING.COM

Posted By: Superglide Ken
Date Posted: 13/December/2006 at 11:51am

The 360 does have a brush for tile and grout. Ted has the pictures for that on his site here that he can show you. Does a pretty good job too, but since the glides used on it are nylon, not teflon, it is not at it's best yet. Now that the carpet glides are finished, I am working on improving the glides for the tile and grout brush as well. They will be out before the Spring.

-------------
Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs.

Posted By: carpetologist
Date Posted: 13/December/2006 at 3:05pm

The Rotovac 360 is an excellent unit for consistent carpet cleaning. Yet it is also a good hard surface floor cleaner but in my estimation a little light weight for cleaning grout and extremely soiled floors.

Go to the http://www.kleenkuip.com/forum/forum_topics.asp?FID=24 - Bonnet & OP Section and look at the before and after pics of hard surfaces & grout cleaned with OP Machines.

-------------
Kleen Kuip Supply Mart Inc.

http://www.kleenkuip.com - New & Used Professional Carpet Cleaning Machines, Restoration Equipment, Training, Service and Supplies

Posted By: Rob Lyon
Date Posted: 18/February/2007 at 4:22pm

I have both the 360 and the sx12, I have to say I like the 360 for carpet

but I don't feel it touches a good spinner tool like a SX12. You can use

it to pre-scrub with.

All The Best, Rob

Posted By: CCandmore
Date Posted: 18/February/2007 at 7:08pm

Thanks for the help. I think I'll go with the sx12.

Posted By: cleanaz
Date Posted: 05/April/2007 at 3:43am

I hate to instigate, but why are you guys scrubbing T&G? The right juice with 1000 psi takes it every time. An SX-12, red line or turbo spinner will outperform.

-------------
http://www.larsonscarpetcare.com - carpet cleaning, tile cleaning, phoenix, mesa, chandler, gilbert

Posted By: carpetrepairguy
Date Posted: 02/May/2007 at 2:54am

I agree with az., although heat is very essential for removing any build up, unless using the op way.

Posted By: thetilesedge
Date Posted: 10/May/2007 at 11:33am

when I first started I was having a big problem with grout not coming really clean. It sucked because I would have to tell the custy why, and it also looked bad on me. So now my dwell time is alot longer and the 1200psi well dirt doesn't have a chance.

Posted By: Rockmoonus
Date Posted: 09/August/2007 at 12:58pm

I agree with az sx-12 rocks