Encapsulation, Very Low Moisture, Oscillating Pad Cleaning

Print Page | Close Window

Brand new/ancient rotary

Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Encapsulation, Very Low Moisture, Oscillating Pad Cleaning
Forum Description: Discuss anything relating to very low moisture, encap and oscillating pad cleaning
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=2528
Printed Date: 22/November/2024 at 10:50pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: Brand new/ancient rotary

Posted By: Revee
Subject: Brand new/ancient rotary
Date Posted: 28/April/2006 at 6:26pm

Picked up a 175 rpm rotary at a yard sale for $48. Probably older than Jesus but it actually works. Think it's a 16". It's called a "multi clean' floor and carpet machine.

Question is what is it good for? I already have low moisture system for carpts, thought perhaps this might be suitable for agitating the pre spray and/or cleaning concrete/tile/and or hardwood? Or is 175 rpm too slow for that?

Machine appears to have some sort of wire brushes installed, then there is a steel wool pad 'laid' over them. The guy I bought it from said he just thows a cleaning or buffing pad against the steel wool pad for a friction fit. Different pads for stripping, polishing, etc. Should I look for a different type of brush, or is there another way of mounting the pad?

Even if it turns out the machine is too antiquated for use in the field I'll probably screw around with it at home. Any suggestions on the above?