Part-Timer Looking to go Bigtime! |
Post Reply | Page <123 |
Author | |
Superglide Ken
Grand Potentate SGK Joined: 17/March/2004 Location: Canada Status: Offline Points: 4868 |
Post Options
Thanks(0)
|
Gmoney: Like I said, I could tell by your post that you were far from a Newbie to this industry. I was not refering to you being a Newbie to this board when I said it. Thanks for clearing up a little of your background. I don't hide any of mine, but I will give you the benefit of any doubt why you don't use your real name. Perhaps to do so would prevent you from being as candid with your comments here. I would not want that to happen. I figgered you were from the GTA when I said I think I know who you are, so I am not surprised to hear you say that.
As far as hearing from people on this board about my glides, you may be a little disappointed in the lack of response. It is still a very new product that has mostly been sold in the USA marketplace so far. I think that maybe all of 40 have been sold into Canada so far. A few on the board have them, but only 2 that I know for sure. Steamin Pile has our latest and has posted that it glides and cleans well. I am sending out a glide to Doug and Steamer so that others here can comment as well. I certainly don't want them to remain a secret to Canadians. I actually did test an SS glide against a Drimaster machine at Kleenkuip last October while I was in town. There was about 10 cleaners present at the time. While not scientific by any means, most of those that were present agree that the glide left the carpet drier than the RDM. No moisture meter used, just feel on the fingers. I supose I will need to do it with instruments to convince you of that though.
I don't deny for a minute that my posts are written as infomercials BTW. It is a style that allows me to both inform and obtain sales for my products at the same time. Many people tell me that they like it. A few do not. The ability to scroll is a wonderful thing for those that do not.
We both share the interest in science and physics it seams. That was always my top subject. I have a pressure chart, but even without it I know that to double flow you must square(4X) the pressure. The flow at 200 psi will not double till 800 psi is used. I was just simplefing to make a point understandable to others reading this was all. You have not disproved my pounds/sq inch theory at all. If you read what I said again, I covered both the surface area covered by the cleaning devices contact points with the carpet and the weight of the wand or RDM on those points. Each produces a distinctive number roughly in line with the rounded number I used to illustrate my point.
I enjoy your input here Gmoney, and can see that we agree on far more than we disagree on after our conversation here. It is good to have a fellow technical person to talk to. On many of the boards I post on, many of my technical posts go over many readers heads, so it is good that I don't have to worry about that with you. I am still much of a novice in marketing and look forward to learning a few things here as well. Not rich yet for sure, but I believe that better marketing in future will take care of that. All equipment mentioned on this board does exist and does produce the results I post about. Sometimes they do not do it consistanly enough for me to bring them to market yet in a big way. Being the perfectionist that I am, anything big that has the potential to revolutionize the WD industry like the Power-Dri system does, must be just right before I realease it. I have kept it to myself for 7 years now ,till I spent that time to get it right. When released, it will be in the industry mags and I will be there too. Being the super persistant person that I am, I will keep at it till it happens.But, I do not knowwhat time that will be.
In life, timing is everything.
Superglide Ken Edited by Superglide Ken |
|
Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs.
|
|
Sponsored Links | |
gmoney
Groupie Joined: 03/September/2004 Location: Canada Status: Offline Points: 78 |
Post Options
Thanks(0)
|
I am anxiously awaiting the feedback from Doug and Mr. Steamer. Nothing convinces people more than direct observation and qualified testimonials. Of course I will not take your glide wand achieving drying times quicker than a drimaster until I see for myself because of what I have seen the RDM do. It's like all the times over the years that a chemical salesman makes grandiose claims about what their chemical can do and then when I use it I am dissapointed. Why don't you send one down to Ted and so all of us in the GTA can see for ourselves; instead of having to rely only on the word of two individuals. Now that would cause quite a stir on this board if you decided to do that. I still think you are incorrect on your calculations regarding the RDM and glide wand because the undeniably tight seal it forms with the carpet in my opinion obviously does not adversely affect the air flow. When Ted showed me the unit a while back even he told me that my high performance portable would leave the carpet drier than a truck mount. And it does (when using the RDM). Much less chance of wick backs as well. I like how you tried to explain your way around the psi doubling issue we had. If you knew the relationship between psi and water flow rate why did you have to refer to your chart? And you have illustrated that saying doubling psi will double flow rate when trying to make a point is an unacceptable oversimplification. If flow rate doubles only after the psi is increased by a factor of 4, then your previous arguement is flawed. Regarding hydramaster incorporating pressure reduction into the RDM I have not had a chance to call; but I will. You will be the first to know what the answer is. I must say Ken, I enjoy our discussions because you get me thinking about the possibilities out there that can improve our industry. My focus in my business has been more intense lately as a result of this board (thank you Ted) and your impassioned posts (thanks Ken). Yeah, I did thank you for something. Don't let it get to your head; although I'm not holding out hope for that! I'm actually curious about your power dri system since your claims regarding this technique has me looking forward hearing more about it. Preparing myself for informercial #4567-65! |
|
If you know what is good for you get it dry as quickly as possible
|
|
Superglide Ken
Grand Potentate SGK Joined: 17/March/2004 Location: Canada Status: Offline Points: 4868 |
Post Options
Thanks(0)
|
Thanks again for your response, Gmoney. BTW, I did send Ted one of my latest SSU802 glides already 3 weeks ago, before I even started posting in earnest here. I figured if I was going to talk about them, I better have one on hand that people can look at and try. Ted has been letting people take it out and test it out for themselves.Hasn't caused much of a stir yet, but maybe most here are not aware yet that they can do that.
A high performance portable on short hose and low pressure can dry carpet faster than most TMs. When we tested the RDM and SS Superglide at Kleen Kuip last October, it was with a Ninja. Dry time was under 30 minutes. I even layed on the carpet being cleaned after that to show that at least on the low pile commercial carpet we used, it was dry to the back to and no moisture could be seen oor felt doing that.
I never looked at my chart to calculate flow when I said that BTW. Just a fast off the top of my head estimation. I should be more careful next time.That undermines what I say if I don't be more accurate. You are right about that.
The Power-Dri System, when released, has the power to change the way the WD business is done. It will only work with PTO TMs at this point. It would also require alot of capital to distribute in the very large US market. This is beyond my resources right now, and would mean that I would need to drop everything else I am working on to do it, which I wont do. The introduction of our new glides to transform how carpet cleaning is done is my main priority now, and is taking up most of my time. But I could afford to launch the Power-Dri into Canada next year if the interest is there. That is much more doable in both money terms and my time commitement required to do it. Since I designed it around the Cleanco TM, and most are here, that seems an easier way to go. Once established here, the money and infrastructure would be in place to start the US introduction after that. Looking forward to your comments as the process unfolds in the months to come, and as the testimonials come in.
Superglide Ken
|
|
Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs.
|
|
gmoney
Groupie Joined: 03/September/2004 Location: Canada Status: Offline Points: 78 |
Post Options
Thanks(0)
|
I'll be visiting Ted sometime next week and will see if I can test out one of your glides. Besides my ability to play Devil's advocate with you, I have a pretty good marketing head. Feel free to bounce some ideas off me and you know I will not hesitate to put my two cents in! You should devise some sort of a professional looking poster that Ted can post in his store so customers have an 'in your face' introduction to your glides. The poster would maybe have your mug shot cleaning carpet and a bubble caption coming from your mouth with all of your informercial points! This way everyone that walks in his shop is exposed to the product and will approach Ted about what the product is all about. I think my marketing services can go a long way on this board if I learn to post informercials as effectively as you! |
|
If you know what is good for you get it dry as quickly as possible
|
|
Superglide Ken
Grand Potentate SGK Joined: 17/March/2004 Location: Canada Status: Offline Points: 4868 |
Post Options
Thanks(0)
|
Good ideas you put forth there, Gmoney. I will get working on that. Thanks for the excellant advice!
|
|
Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs.
|
|
diva
Groupie Joined: 03/September/2004 Location: Canada Status: Offline Points: 130 |
Post Options
Thanks(0)
|
Hey Ken It seems like you'll be soooooooooooo busy working on your "new" and "Improved" SUPER GLIDES that you'll have no time to invent SUPER PADS!! Carpet DIVA Edited by diva |
|
THE DIVA
|
|
Superglide Ken
Grand Potentate SGK Joined: 17/March/2004 Location: Canada Status: Offline Points: 4868 |
Post Options
Thanks(0)
|
Diva: I already have them finished. Just waiting for the right-time for introduction. As you pointed out, I have many other products already coming out betwen now and November, without needing to add more to it. If they are needed in the marketplace, I will introduce them at the right time.In life, timing is everything.
|
|
Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs.
|
|
dennis_is_ok
Carpet Cleaning Specialist Joined: 02/August/2005 Location: Canada Status: Offline Points: 460 |
Post Options
Thanks(0)
|
Well how's it going now? Do you have a "multi-man" operation yet?
|
|
carpetologist
The Great Hardini Hocus Pocus Joined: 20/January/2004 Location: Canada Status: Offline Points: 1712 |
Post Options
Thanks(0)
|
Since gmoney and Diva are too busy to participate in the Forum these days I will speak for them.
Yes, they are busy but no they are not yeat a multiple crew operation. Although they should be because of the quality they offer. They way I see it there are two things holding them back.
A. They charge higher than average prices and it takes time to get clients to recognize the difference.
B. They have the same challenge as the total GTA carpet cleaners. Employees...should I say more?
I must thank gmoney for introducing me to the Accelerator that I now sell. I am extremely pleased as are the cleaners that I have sold it to.
If you wish to make better than average money cleaning open-areas and hallways with a one-man simple operation you should take a look or take a test drive. It can be seen on this site or in our showroom.
|
|
Kleen Kuip Supply Mart Inc.
New & Used Professional Carpet Cleaning Machines, Restoration Equipment, Training, Service and Supplies |
|
Post Reply | Page <123 |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Welcome to KleenKuip.com's Professional Carpet Cleaners Discussion Forum!