Looking to add on |
Post Reply |
Author | |
814jeffw
Newbie Joined: 15/June/2007 Status: Offline Points: 6 |
Post Options
Thanks(0)
Posted: 06/July/2007 at 5:45am |
Hi, I'm looking to add carpet cleaning to my current business, which is exterior house washing and roof cleaning. Looking for supplement Winter work and was looking at buying a Mytee 1003DX with a heater. Was also gonna purchase a Rotovac wand. Is this a decent startup set or is it gonna blow circuits because of the heat. Is there a portable that doesn't blow circuits as often as another. Also what does anyone think of the startup package that Rotovac offers? Was also looking at the Recoil-3. Could someone tell me the main advantages of the Recoil-3 over the Mytee 1003DX?
Thanks, Jeff Edited by 814jeffw - 06/July/2007 at 5:58am |
|
Jeff Wible
Raystown Pressure Washing |
|
Sponsored Links | |
Jeff Van Buren
Groupie Joined: 29/May/2007 Location: United States Status: Offline Points: 64 |
Post Options
Thanks(0)
|
Jeff-
You may want to rethink carpet cleaning as winter work, after December it slows down drastically. As for circut blowing. I use portys with Rotovac just make sure you do have a circut buddy to insure your on seperate circuts. Also when using the Rotovac you will be going through water fast enough that if you start with Hot water it will still be hot before you run out. Rotovac does a great job but uses much water. On older homes you will blow ciccuts so don't even plug in your heater. Most portys will run 10.5-15amp draws. |
|
814jeffw
Newbie Joined: 15/June/2007 Status: Offline Points: 6 |
Post Options
Thanks(0)
|
Thanks Jeff, not really looking to get rich in the Winter, but I have quite a few regular customers from my other business that would possibly make it worth buying the equipment and going from there. Possibly keep it going through the warm months as well. Is the Recoil-3 a heated machine? Does heat make the difference or is the proper use of cleaners with cold just as effective. I realize it may take longer with cold, but are the results the same in the end? Any portable recommendations?
Jeff Edited by 814jeffw - 06/July/2007 at 6:20am |
|
Jeff Wible
Raystown Pressure Washing |
|
Ed Valentine
Carpet Cleaning Specialist Joined: 14/September/2004 Location: United States Status: Offline Points: 770 |
Post Options
Thanks(0)
|
Jeff;
Here is a recent e-mail from Mr. Jim McDannel (727-542-3412) who also uses a RX20 that may help answer your question: Hello Cross-American, The RECOIL-3 XPS machine has power, I gotta say thats AWESOME, I was only running the 50ft using the Rx20 on a pretty rough carpet, Im guessing 1hr dry time, I went back and check the living room when I was done with the Bedrooms and it was almost dry to the touch then.. You're unit runs great did a condo today, and got amazing results, simply amazing drying times, You're portable will give my P/C Legend a run for its money.. I don't mind doing the condo work now, before I hated it using a slow unit, man you can really blow through them now.. Jim McDannel, FL. PS: If you need a reference for florida just let me know, I would be happy to show the machine for you.. -------------------------------------------------------------------------------- Man Ed, I used your machine again today, Every time I hook that thing up Im still impressed, I have two truck mounts, One with a 3.5 blower and a 4.5 blower, Your portable will give my legend a run for its money on dry times, the legend only cost me 12,000 in 97 if only I had your unit then.. If gas keeps going up, I guess I'll be buying options for the Recoil, ________________________________________________________ Hope this helps; Ed Valentine |
|
Ken Harris
Grand Potentate Joined: 12/January/2006 Location: Canada Status: Offline Points: 1120 |
Post Options
Thanks(0)
|
Gas will be GOING UP. Get a high performance portable now, as you are going to need it.
|
|
Inventor of Teflon Carpet Wand Glides.Free Glides for all Cleaners in June!
|
|
John L
Carpet Cleaning Guru Joined: 29/November/2004 Location: I'm Right Here! Status: Offline Points: 4013 |
Post Options
Thanks(0)
|
814jeffw,
After using portys for over 10yrs with no heat for 8yrs on the portys and TM's off and on for 10yrs with massive heat I would recommend heat.. If the porty don't have it.. Get it.
I just sold my portable heat exchanger to one of my nearby competitors that has a porty and he is sooooo happy he added heat..
Heat breaks surface tension just like a surfactant, except better. It keeps the water from forming the water spots.
Think of how you can use heat to cut your labor, time, chemicals, and agitation. If increased, any of these are potential dangers that can cost you safety and money on the job.
Heat cost you nothing. You actually save money by decreasing the other elements..
|
|
814jeffw
Newbie Joined: 15/June/2007 Status: Offline Points: 6 |
Post Options
Thanks(0)
|
Thanks for the replies, gonna start talking to some of my current customers to see how popular the idea is with them. I'll be surfing these boards and asking questions as they arise. I have a very good reputation in my other work so I want you all to know that I'm not just a "quick buck artist" looking for beer money. To me, repeat work is the ultimate tell all for a business' legitimacy. I'll take the advice on the heat.
Jeff |
|
Jeff Wible
Raystown Pressure Washing |
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Welcome to KleenKuip.com's Professional Carpet Cleaners Discussion Forum!