40K to start up. Help me out please |
Post Reply | Page 12> |
Author | ||
kingjoelking
Newbie Joined: 13/March/2008 Location: AZ Status: Offline Points: 11 |
Post Options
Thanks(0)
Posted: 06/August/2010 at 1:54pm |
|
I would not go with the Titan. IMHO. I would look for a simpler machine.
I have a Panther 25 and yes it puts out silly amounts of heat. Very simple machine. Some of the layout is not so well thought out. But it is manageable. Duane Oxley makes some very nice machines that are very simple and well thought out and can frankly be worked on by yourself if you are even remotely mechanical. And put out amazing heat. But if I had $40k to start all over again and especially since your primary target is going to be commercial work. I would have started off with a Cimex. For $3k an Orbot For $2500 a Multi Sprayer for $500, Either Releasit chemicals. $500 (enough for a 100,000 sf or so of carpet cleaning. Some Gladiator pads at $15 each. so probably 20 or so $300. Then a simple extractor with either Propane or Diesel heater. (i would not get a unit with a heat Exchanger again) possible units, Masterblend El Diablo, Accelerated or Truckmount Systems Dominator. Those two units have some serious heat and they can be upgraded with a much bigger solution Pump to possible power spray with. Both of those Units run around $15-$17K. You would only need the Cimex and Orbot (Even a Brute instead of and Orbot would be a good idea also) on 90% of your commercial carpet cleaning. Much faster work and really Superior results. That would leave you with Quite a bit of money for marketing.
|
||
Sponsored Links | ||
Atlantis
Senior Member Joined: 12/August/2007 Status: Offline Points: 117 |
Post Options
Thanks(0)
|
|
No. But I'll be happy to post one sometime next week :). I'm working by myself right now but I need to clean my own carpets as soon as my girlfriend comes back from out of town. So I'll have her take some video when I do!! That's a great idea by the way Might put it up on my website!
|
||
John L
Carpet Cleaning Guru Joined: 29/November/2004 Location: I'm Right Here! Status: Offline Points: 4013 |
Post Options
Thanks(0)
|
|
Do you have a video of this cloud?
|
||
Atlantis
Senior Member Joined: 12/August/2007 Status: Offline Points: 117 |
Post Options
Thanks(0)
|
|
I know this is my an old post but I thought I would put my 2 cents in. $40,000 for one van is WAAAAAAAAY TOO MUCH TO SPEND.
Those "big" truck mounts, are a complete and total waste of money. Unless you are running two wands or over 250 ft. of hose then I would advise completely against them. I've used a Prochem Aphex, Panther 25, Dynachems top model w/ propane tank, and I now own a Panther 18. Let me tell you. They are ALL the same. The only difference is the packaging. They use the same type of blower, same engine, same water pump. It's all smoke and mirrors. Do yourself a favor. If you are looking for a brand new truck mount (which I would suggest because you don't want to break down on a job), get yourself a Panther 18. It's right at that sweet spot between too much power and not enough. My old 25 cleaned about the same as the Panther 18. The Panther is about $8900 on Ebay directly from Chemtex w/ $400 shipping. For the van, look on Craigslist and get yourself either a nice box van for about $5000-$8,000 or a nice cargo van from anywhere from $2,000-$5,000. I bought a 94 Ford E-150 in fairly good looking condition and in excellent working condition for $1600. So far, I've had it for two years and the only thing I've had to do was get it inspected and recharge freon. I "could" get a $500 paint job if I wanted, give it a newer look, but honestly, customers don't care what you drive, they care about how you clean. Back in the day when I worked for a scam company called Kiwi, I use to drive a Mitsubishi Mighty Max with a buffer in the back and made money!! Alternately you can get a QUALITY used machine/van for anywhere from $7000- $15,000. And like Any said, the maintenance is what's most important. I can tell you from experience, the Panther units are EXTREMELY easy to work on. If you can install a door in your house, or change your own auto oil, then you can work on a Panther. The Panther 18 steams about 2.5 ft. when I clean. A CLOUD of steam! |
||
shaoqingan
Newbie Joined: 01/March/2009 Location: Dallas Status: Offline Points: 25 |
Post Options
Thanks(0)
|
|
I think van can not be too small, but need not be a brand new, second hand will be much cheaper. For the machine, the bigger power means more fuel. It is good to buy the machine that is just enough for your job. If you can handle all the job by yourself, you do not need 3 wand machine. If most of your jobs are residential, and they are within 250ft distance, you do not need to buy a bigger machine. But the after-sale service is very important. Do not buy used TM if you are not professional.
Good luck
Andy from www.havehouse.com Dallas Havehouse Carpet Cleaning
|
||
Andy
Dallas HaveHouse Carpet Cleaning www.havehouse.com |
||
besttruckmount
Newbie Joined: 08/June/2010 Location: hamilton Status: Offline Points: 1 |
Post Options
Thanks(0)
|
|
if you want a truck mount for about $30000 with blower #5 or #6 call this guy at 905 9818381 wow he builds truck mount for people customs work and is has no heat exchangers but has lot of heat all the time at 110 deg ask for lenny
|
||
jaymark1
Senior Member Joined: 27/January/2009 Location: Willow Grove Status: Offline Points: 129 |
Post Options
Thanks(0)
|
|
I would recomend calling Ernie at the Jondon in langhorne PA. He has used most of the truck mounted systems. Even though he sells them, he will offer you his unbiased advice and I use his advice for almost anything.
|
||
I dont predict the future or sell glides, am I allowed on this site?
|
||
stagman
Newbie Joined: 23/March/2010 Location: Hitchin, Herts Status: Offline Points: 6 |
Post Options
Thanks(0)
|
|
lol exactly. Internet forums can be extremely useful...especially if they are dedicated sites such as this one.
|
||
Stag Cleaning Services - Hitchin, Hertfordshire, domestic or commercial
|
||
John L
Carpet Cleaning Guru Joined: 29/November/2004 Location: I'm Right Here! Status: Offline Points: 4013 |
Post Options
Thanks(0)
|
|
|
||
MR. STEAMER
True Patriot Only in the GTA Joined: 03/March/2004 Location: Canada Status: Offline Points: 14549 |
Post Options
Thanks(0)
|
|
The major thing with any piece of equipment is SERVICE...make sure you service it correctly so it will produce for you.
and I would also scrap the 3/4 ton truck and go for a 1 ton..
you can find all that info right here in this forum if you did a search..
truthfully every post on this forum gets hijacked and people are generally to lazy to give you the information that you seek...the just post a site...LOL
all the forums are filled with crap
|
||
www.mr-steamer.com
|
||
stuey
Newbie Joined: 24/January/2010 Location: bismarck,nd Status: Offline Points: 35 |
Post Options
Thanks(0)
|
|
one little thought for you, go with a rotovac instead of a wand! big marketing tool, and also out performs a wand 110%! just my opinion as i am new in the carpet cleaning businesses as well. everytime i go into a home and the customer sees the rotovac they are amazed!
|
||
caleb211
Newbie Joined: 11/March/2010 Status: Offline Points: 2 |
Post Options
Thanks(0)
|
|
40K is my truck budget, I will need it repaired professionally. I don't care if I buy locally or over the net I will go with the best bang for the buck. As far as performance I like the idea of having 3 wands with the titan 875 I especially like the high power pressure washer that comes with the titan 875. I don't want to finance anything because it seems like that is how people are going out of business. If you don't have a loan to pay off you can build your business without fear.
|
||
Michael
Carpet Cleaning Specialist Joined: 18/June/2005 Status: Offline Points: 557 |
Post Options
Thanks(0)
|
|
caleb,
Do you have a local supplier and service center for carpet cleaning? Do you want to shop locally or over the Internet? Will you take it to a professional for service, or will you service it yourself? What are your performance requirements? Is 40K your total business start-up budget or your van budget? Will you finance anything? Answers to the above questions plus many more will go into determining which unit it best for you. Because I have a local supplier and service center, it's easy to ask the people who will service our equipment which machines they prefer--performance, durability/serviceability, etc. If you have the ability, I recommend going that route. |
||
Ken_Is_OK
Carpet Cleaning Specialist Joined: 13/February/2007 Location: Canada Status: Offline Points: 523 |
Post Options
Thanks(0)
|
|
ccc.ccsop.com
yah, great info
|
||
Post Reply | Page 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Welcome to KleenKuip.com's Professional Carpet Cleaners Discussion Forum!