Print Page | Close Window

Candle wax removal made easy

Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Urine Stains and General Spot Removal
Forum Description: Having trouble getting that spot out? Problems with urine?
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=935
Printed Date: 27/April/2024 at 5:10pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Candle wax removal made easy
Posted By: Willy Parsons
Subject: Candle wax removal made easy
Date Posted: 05/January/2005 at 1:32pm

1) Put kettle on

2) Pour boiling water over wax

3) Vac off.

4) Repeat as needed.

* Some dye may remain- use your favourite product for this.



-------------
Certified to be certifiable.



Replies:
Posted By: doug
Date Posted: 05/January/2005 at 2:12pm

[ Some dye may remain- use your favourite product for this.[/QUOTE]

Butane?Guitar



-------------
Just My opinion


Posted By: Willy Parsons
Date Posted: 05/January/2005 at 3:37pm
I was thinking a two parter with ammonia and peroxide, but if butane works.....

-------------
Certified to be certifiable.


Posted By: MR. STEAMER
Date Posted: 28/January/2005 at 12:17am

I remove candle wax like this...

1) get a real sharp KNIFE

2) cut the area out

3) look at what you did NOW ...there's a big hole in the carpet

4) have carpet replaced

5)never burn candles again



-------------
www.mr-steamer.com


Posted By: doug
Date Posted: 28/January/2005 at 7:49am
The wax belongs oto the customer the hole belongs to you.Guitar

-------------
Just My opinion


Posted By: MR. STEAMER
Date Posted: 28/January/2005 at 1:02pm
Those where instructions for the customer

-------------
www.mr-steamer.com


Posted By: doug
Date Posted: 28/January/2005 at 3:01pm
In what language?Guitar

-------------
Just My opinion


Posted By: MR. STEAMER
Date Posted: 28/January/2005 at 5:56pm
Stain Removal for IDIOTS... it's my new book... can't get it out cut it out

-------------
www.mr-steamer.com


Posted By: doug
Date Posted: 28/January/2005 at 7:04pm
Wouldn't it be easier to just put a mat over it?Guitar

-------------
Just My opinion


Posted By: MR. STEAMER
Date Posted: 28/January/2005 at 7:43pm
hmmm never thought of that

-------------
www.mr-steamer.com


Posted By: doug
Date Posted: 28/January/2005 at 10:57pm
More secrets gone.Guitar

-------------
Just My opinion


Posted By: MR. STEAMER
Date Posted: 29/January/2005 at 8:59pm

Hey doug I see you get a mention on Lee's web site...

the best in GodURich



-------------
www.mr-steamer.com


Posted By: doug
Date Posted: 29/January/2005 at 10:35pm
Mr. Steamer:  I have never seen his web site that I can remember. If I have it has to have been a long tme agoGuitar

-------------
Just My opinion


Posted By: MR. STEAMER
Date Posted: 10/February/2005 at 10:15pm
I checked it again today... and now that whole page is gone

-------------
www.mr-steamer.com


Posted By: doug
Date Posted: 10/February/2005 at 10:23pm
Mr. Steamer:  You mean I have been disposed of??Guitar

-------------
Just My opinion


Posted By: MR. STEAMER
Date Posted: 10/February/2005 at 10:29pm
poof!

-------------
www.mr-steamer.com


Posted By: doug
Date Posted: 10/February/2005 at 10:34pm
Out of sight out of mindGuitar

-------------
Just My opinion


Posted By: MR. STEAMER
Date Posted: 10/February/2005 at 10:40pm
put out to pasture

-------------
www.mr-steamer.com


Posted By: doug
Date Posted: 10/February/2005 at 10:50pm
Just like yesterdays news.Guitar

-------------
Just My opinion


Posted By: surroundings
Date Posted: 11/February/2005 at 1:00am
Originally posted by Willy Parsons Willy Parsons wrote:

1) Put kettle on

2) Pour boiling water over wax

3) Vac off.

4) Repeat as needed.

* Some dye may remain- use your favourite product for this.



What ever happened to drawing it out onto another surface with a warm iron?

Also: the 'freeze' spray stuff works, but I'd not use it on delicate fabric.

Cheers,

Allen


Posted By: MR. STEAMER
Date Posted: 11/February/2005 at 11:14pm
way to stick on topic Allen

-------------
www.mr-steamer.com


Posted By: Willy Parsons
Date Posted: 16/March/2005 at 10:22am
Allen - TOO slow. This is instant gratification.

-------------
Certified to be certifiable.


Posted By: Lee Stockwell
Date Posted: 16/March/2005 at 1:55pm
It'll melt right out with 111 trike...


Posted By: danmarck82
Date Posted: 16/March/2005 at 11:25pm
What is 111 trike ? Sorry Lee Haven't used it or at least by thay name. ??


Posted By: Lee Stockwell
Date Posted: 17/March/2005 at 1:02am

Kind of a nostalgic look back at a very effective solvent that is rapidly becoming unavailable in the US due to recent treaties banning such clorinated hydrocarbons. I have about 20 pints of it left, too valuable to use on a common candlewax situation.

1,1,1 triclorethane and its close cousins used to be considered a safe alternative to carbon tetra cloride, and was used extensively to clean electronic components.  One unique feature of these solvents that had a clorine atom attached was an otherwise dangerously explosive or flammable chemical was thus rendered nonflamable and nonconductive to electricity.  This class of chemical, though not as dangerous (directly) to humans as the former solvents they replaced, or the newer solvents that are in turn replacing them, were however implicated as a catylist in the atmosphere that facilitated aggressive destruction of our protective ozone shield against the sun's powerful UV radiation.  That darn chlorine atom, so useful on the ground, can be otherwise when let on the loose.

 

More....

Thanks,

Lee

ps. there are better ways to get rid of the wax involving a hair dryer and regular paper.



Posted By: cleencarpet
Date Posted: 18/March/2005 at 7:26pm
wax is very easy lay a wet terry cloth on the wax take a house hold iron
put it on a med low setting place on the rag the wax transfers into the reg
in about 60 sec or less.

i deal with alot of stains in multi housing wax a koll-aid or the easiest but
for some rason people have a hard time with these.

Chris


Posted By: danmarck82
Date Posted: 19/March/2005 at 12:44am
The more we can share and learn about spot and stain removal the better
off we all will be. I have to admit using a scissor more times than I want
to admit in the past.

But in the last two years I have used many of the PRO"S CHOICE products
and have a greater amount of confidence in my skills of spotting then
ever before, If they have a seminar in your area it is well worth your time.
Then practice practice , practice.

Lot of things I plain didn't make an effort on years ago now come out.
The technology has improved . So you old timers like myself may need to
not think we know it all and get back to the classroom once in awhile or
learn from other mistakes on the web. I admit I am abetter Spotter today
than I was 3 years ago. The chemicals have improved greatly.


Posted By: cleencarpet
Date Posted: 19/March/2005 at 12:41pm
i have to admit i really like the pros-choice line there are still a few items
i stick with from other vendors but a majority of my chem line has been
PC for the past year.
excellent stuff and very competitvely priced my chem cost went down
quite a bit switching to them, and my results went up and took less effort.
this stuff is working great for me.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net