Welcome to KleenKuip.com's Professional Carpet Cleaners Discussion Forum!

  
Carpet Cleaning Forum Homepage
Forum Home Forum Home > Carpet Cleaners Discussion > Tile and Grout and Hard Surface Floor Cleaning Discussion
  New Posts New Posts RSS Feed - Slate Tile
  FAQ FAQ  Forum Search   Events   Register Register  Login Login


Commercial Floor Cleaning Machines

Slate Tile

 Post Reply Post Reply
Author
Message
AndyMan View Drop Down
Groupie
Groupie


Joined: 18/March/2009
Status: Offline
Points: 54
Post Options Post Options   Thanks (0) Thanks(0)   Quote AndyMan Quote  Post ReplyReply Direct Link To This Post Topic: Slate Tile
    Posted: 06/March/2010 at 8:18am
Hello,
 
I am looking for some help with Slate tile.  I am bidding on a 5k square foot facility of previously sealed slate tile.   I do not know what has been used on the tile previously to seal it.   The Facility is 50 years old so it probably has many different things on it.  I tried to clean a sample area with traditional floor stripper and it cleaned it well but did not touch the sealer.  I am considering just doing a deep scrub without stripper with a stiff brush and re-applying floor finish.  I know I can get the floor clean enough for finish but I don't know if it will bond correclty and not flake off.  Does anyone have any experience with this????Confused
AndyMan
Back to Top
Sponsored Links


Back to Top
Carpet Cleaning View Drop Down
Groupie
Groupie


Joined: 16/July/2009
Status: Offline
Points: 39
Post Options Post Options   Thanks (0) Thanks(0)   Quote Carpet Cleaning Quote  Post ReplyReply Direct Link To This Post Posted: 10/March/2010 at 2:09am
while you clean a slate floor, you want to remove dirt and stains with no damaging the tile or staining it. set up by establishing a few house policy, like not wearing shoes on your slate floor, which will help to decrease tracking. If you have slate flooring in the kitchen, use small throw rugs around the stove and the sink to catch spills before they hit the floor; likewise with a slate floor in the bathroom. These steps will make it much easier to clean a slate floor
Back to Top
Mark McMaster View Drop Down
Senior Member
Senior Member
Avatar

Joined: 22/October/2007
Location: Trenton,Ontario
Status: Offline
Points: 170
Post Options Post Options   Thanks (0) Thanks(0)   Quote Mark McMaster Quote  Post ReplyReply Direct Link To This Post Posted: 17/March/2010 at 10:25pm
I hope you price this accordingly. 5K, you'll be there a week if you don't know what's on that slate. 50 yrs old, that could be urethane on there as well.
 Use some stripper to test and use some acetone as well.
Don't take your organs to heaven.....
Heaven knows we need them here

www.mcmastertile.com
Back to Top
AndyMan View Drop Down
Groupie
Groupie


Joined: 18/March/2009
Status: Offline
Points: 54
Post Options Post Options   Thanks (0) Thanks(0)   Quote AndyMan Quote  Post ReplyReply Direct Link To This Post Posted: 18/March/2010 at 7:45am
actually I think it is urethane under there and I my plan was to not even attempt to remove it but instead just do a "soft scrub"  with some neutral cleaner and a nylo brush on the end of my 175 rpm machine.  I was also thinking of using the spinner to rinse well with the tm..  My only concern is if the floor finish will stick well considering I am not really stripping the old stuff off..  Do you have any experience with this???
AndyMan
Back to Top
Mark McMaster View Drop Down
Senior Member
Senior Member
Avatar

Joined: 22/October/2007
Location: Trenton,Ontario
Status: Offline
Points: 170
Post Options Post Options   Thanks (0) Thanks(0)   Quote Mark McMaster Quote  Post ReplyReply Direct Link To This Post Posted: 18/March/2010 at 10:54am
. If it's urethane, you have to get it all off for sure or nothing is gonna bond.If it is urethane, use a paint stripper and then neutralize. Charge accordingly. Sometimes the gel strippers work better but you have to let it sit longer tho.


Edited by Mark McMaster - 18/March/2010 at 11:00am
Don't take your organs to heaven.....
Heaven knows we need them here

www.mcmastertile.com
Back to Top
John Hilbrands View Drop Down
Newbie
Newbie


Joined: 21/April/2010
Location: Temecula Ca
Status: Offline
Points: 6
Post Options Post Options   Thanks (0) Thanks(0)   Quote John Hilbrands Quote  Post ReplyReply Direct Link To This Post Posted: 21/April/2010 at 1:04pm
I did about 100 floor cleanings 1000-2000 sq ft each last year and I never refinish.  I guess if you want to make perfect strip and refinish but I usually do like you test the best cleaner and then just use it.  I use the 175 rpm rotory & pole grout brush and then use a steam wand on skids and then towel dry. 
On one clay tile it needed refinish due to bad previous sealers and even gel wouldn't remove it.  I discovered sanding worked and said We could blast it. The customer called some "specialists"  who said replacement was necessary.  He called me back and I called a soda blaster it came out great. 

Edited by John Hilbrands - 21/April/2010 at 1:17pm
Sometimes you just have to go for it.
My website: http://www.hilbrandscarpetcare.com
Back to Top
AndyMan View Drop Down
Groupie
Groupie


Joined: 18/March/2009
Status: Offline
Points: 54
Post Options Post Options   Thanks (0) Thanks(0)   Quote AndyMan Quote  Post ReplyReply Direct Link To This Post Posted: 21/April/2010 at 3:29pm
The conclusion to the story:  I did use a floor cleaner (not floor stripper)  I mopped on , let it set for a bit and scrubbed with a 175 machine and a stiff brush.  I then rinsed with my truckmount and spinner.  The rinsing process really worked well.  I then put on 3 coats of high solids floor finish and it looks like glass!! client very happy which is what matters most!!  Truckmount was the key here!!  gotta love the heat!!
AndyMan
Back to Top
 Post Reply Post Reply

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.06
Copyright ©2001-2023 Web Wiz Ltd.

This page was generated in 0.314 seconds.